‘REFRESHING LOOK’ EYE CREAM
BASF
Preparation:
Heat the oil phase A (with Ultragel 300) to 80-85°C and mix homogeneously. Heat phase B the 80-85°C and add to the oil phase while stirring. Allow the emulsion to cool while stirring in such a way that it remains in continuous motion. Avoid the incorporation of air. If necessary homogenise with a suitable dispersion unit (e.g. Ultra Turrax) approx 55°C. Add the components of phase C at 40°C. If necessary adjust the pH value. Stir while cooling to 30°C.Notes:
Properties pH-value (as is): 5.2 Viscosity: 100000 mPa·s (Brookfield RVF, 23°C, spindle TE; 4 rpm, Helipath) Suppliers 1 Cognis 2 Schülke & MayrDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
THERE IS NO SUBSTITUTE FOR PERFORMANCE
Whether you are formulating a standard personal care product or looking for the next texture innovation, Grant works ahead of the competition to deliver the formulation solutions you need. With an extensive portfolio of quality ingredients combined with our dedication to customer service, we deliver the...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
