Banish The Breakage Conditioner
TRI-K Industries
Preparation:
1. Combine Phase A with mixing. 2. Combine Phase B and heat to 80-85oC. 3. Once both phases are at 80-85oC, add Phase B to Phase A and homogenize at 3000RPM for 3-5 minutes 4. After Homogenizing cool batch to 40-45oC. Add Phase C. 5. Cool to 45oC or below and adjust pH between 4.5-5.0. 6. Add Phase E one by one. 7. Add Phase E and Phase F one at a time.Notes:
Application: After shampooing, apply to hair, focusing on mid-lengths to ends. Leave on for 2-3 minutes, then rinse thoroughly. For best results, use it regularly as part of your hair care routine. Hero Ingredient: EverBond® Specifications: • Appearance: white, cream-like appearance • pH: 4.5-5.5 • Viscosity (Brookfield, Spindle#5, RPM20): 5,000-25,000 cps • Stability: Pass (3 months at 5°C, 25° C, 45° C and 50°C; Freeze/Thaw: 3 cycles) • PET: PassDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Good Face Project is beauty’s only cloud-based, AI-powered Formulation, Regulatory Compliance, and PLM Software. Since 2018, Good Face has been building the world's largest centralized International Nomenclature Cosmetic Ingredient (INCI) database which encompasses up-to-date scientific research, worldwide regulations, retail policies and...
in-cosmetics Asia 2025
BITEC, Bangkok, Thailand
4th - 6th November 2025
SCS Formulate 2025
Coventry Building Society Arena, UK
11th - 12th November 2025
