Leave-On Conditioner Spray
TRI-K Industries
Preparation:
1) Add Carbomer to the water after fully hydrated add remaining Phase A ingredients and mix until uniform, heat to 70°C. 2) Combine Phase B ingredients heat to 70°C. Add Phase B to Phase A, Add Phase C, homogenize for 3 minutes. 3) Cool Batch to 40°C, then add Phase D ingredients, mix until uniform.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Silverson Machines, Inc.
355 Chestnut St. , East Longmeadow, MA 01028
Phone: 413-525-4825
Fax: 413-525-5804
Silverson Machines
High Shear Mixing Equipment for the Cosmetics and Personal Care Industries
Silverson experts understand the mixing challenges you face in the cosmetics industry, such as reducing...
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
