Shampoo
TRI-K Industries
Preparation:
1) Add TRIquat 10L to the water, after it is fully hydrated add remaining Phase A ingredients. Heat to 60-65°C while mixing. 2) Add Phase B ingredients individually while mixing, ensuring uniformity after each addition. 3) Cool the Batch to 40°C, then add Phase C ingredients individually, mix well until uniform.Notes:
pH 6.54 Viscosity # 6@ 20 rpm 14,800 cpsDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Our company was established in 1958 as SEIWA KASEI Industry CO., LTD., an organization for the development of industrial decomposition technology of waxes and high melting point esters such as Beeswax, Privet wax, and Carnauba wax, and for the production of various types of emulsifying waxes. In 1966, we launched our products, hydrolyzed...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
