Silicone-Free Hair Water
Preparation:Mixing Procedure 1. Mix the preservative with the Ethanol Solutions 3, UN 1170, PG II, SDA 40-2, 200 Proof of Phase A with medium propeller speed until uniform. 2. Mix the fragrance with the Glycerox 767 until uniform. Slowly add to Phase A with medium propeller agitation. Continue mixing until the Phase is completely clear. 3. Mix the Florasolvs PEG-10 Sunflower with the glycerin until uniform. Add to Phase A slowly with medium propeller agitation. Mix until uniform. 4. Add the Floraesters K-20W Jojoba to Phase AB with medium propeller agitation. Continue mixing until completely homogeneous. 5. Add the Catinal STC-25W to Phase ABC with medium propeller agitation. Continue mixing until completely homogeneous. 6. Add Phase ABCD to the deionized water of Phase E very slowly. Continue mixing with medium propeller agitation until uniform. Note: All mixing is done at room temperature
Notes:1 Preservative: Bronidox® 1160 (INCI: Phenoxyethanol) supplied by BASF Corporation
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.