Fresh & Smooth Moisturizing Hand Sanitizer
Cargill Beauty
Preparation:
Mixing Procedure 1. Add the deionized water of Phase A to the main vessel. Add the Carbopol Ultrez 10 Polymer and mix with propeller agitation until completely hydrated. 2. In a separate vessel, mix all ingredients of Phase B with propeller agitation. Heat to 35-40°C. Keep mixing until the Klucel Hydroxypropylcellulose HCS and the Natrosal 250 HR CS are completely hydrated. Cool to room temperature. 3. Add Phase B to Phase A at room temperature with propeller agitation. 4. Add Phase C to Phase AB with propeller agitation. The mixture will begin to gel. 5. In a separate vessel, mix all ingredients of Phase D before adding to Phase ABC with propeller agitation. 6. Add Phase E to Phase ABCD with propeller agitation to completely neutralize the Carbopol Ultrez 10 Polymer.Notes:
Typical Properties: pH: 6 - 7 Viscosity: 3 - 8kcP 1 Floratech Claim Sheet CS 09-014: Increased Skin Hydration with K-20W Jojoba Plus GlycerinDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Expertise at a Glance:
As part of Certified Group, Certified Laboratories is committed to delivering technical solutions and quality testing our customers can feel confident in – So The World Can Trust In What It Consumes™. Our network of FDA-registered, ISO 17025-accredited labs provides comprehensive testing services for cosmetics,...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025