SLIMMING OIL-LIKE GEL
Preparation:Manufacturing Procedure: 1. Heat phase B up to 70-75°C. 2. When B has reached 70-75°C, sprinkle phase A under gentle mixing. Wait for 20 minutes or more if necessary to ensure no lumps remain in solution. 3. Add phase C. Wait for 5 minutes under gentle mixing. 4. Add phase D. After 2 minutes of contact, increase speed rate to maximum for 2 minutes. 5. Leave the product untouched (no stirring at all).
Notes:Formula Specifications: Aspect: Opalescent and iridescent gel Viscosity (Rheo ELV 8, spindle 4, 6 rpm, 3 min): > 100 000 cps pH: NA Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.