Ultra Skin Protect GP4G (In Vivo SPF: 24)
Ashland
Preparation:
1. Add water into main vessel and begin to heat to 80°C. 2. Sprinkle in Phase B at 60°C and mix well until homogeneous. 3. At 80°C, add Phase C and mix well and add Phase D. 4. Prepare Phase E in a side beaker and heat at 75-80°C. 5. At 80°C add Phase E into the main vessel and mix well. The emulsion should be homogeneous. 6. Begin cooling. 7. At 65°C add Phase F and mix well. 8. Cool until 30°C and add Phase G then Phase H, mix well until homogeneous between each phase. 9. Stop at 25°C.Notes:
Appearance: White, butter-like, opaque cream pH: 5.4 – 5.9 Viscosity (D1): 110,000 – 190,000 cps (Brookfield RVT/Spindle D/5 rpm/1 minute/25°C) This formula has passed 3-month accelerated lab stabilities and a 28-day challenge efficacy test. However, the preservative system has not been optimized to its lowest effective level.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
