Black Widow Mascara

Phase
Product
INCI Name
Supplier
Volume
A
Deionised Water
Aqua
57.09
1. Zemea®
Propanediol
2.00
1. Keltrol® CG-SFT
Xanthan Gum
0.40
1. Sodium Hydroxide (pellets 100%)
Sodium Hydroxide
0.50
2. CreaBlack®
CI 77499
10.00
3. Saliguard® MEPX
Phenoxyethanol, Methylparaben, Ethylparaben
1.00
B
Palmera® B1802
Stearic Acid, Palmitic Acid
5.00
Cutina® GMS V
Glyceryl Stearate
3.50
Beeswax 8104
Cera Alba
5.50
Syncrowax™ HRC
Tribehenin
3.00
Dermofeel® Toco 70 (non GMO)
Tocopherol, Helianthus Annuus Seed Oil
0.01
Performa™ V 6112 Polymer
C28-52 Olefin/Undecylenic Acid Copolymer
2.00
C
Xiameter® PMX-200 Silicone Fluid 2cs
Dimethicone
3.00
D
Planoxia-RG
Aqua. Butylene Glycol, Panax, Ginseng Root Extract
2.00
Coloursphere® WL 40 Black HL
Styrene/Acrylates Copolymer, PEG 26-PPG 30 Phosphate, CI 77499
5.00

Preparation:

1. Heat phase A to 85° C. 2. Add ingredients of phase A1 in given order and stir until completely dissolved. 3. Add and disperse A2 while stirring. 4. Add A3. 5. Homogenize phase A-A3 prior emulsification. 6. Heat phase B to 85° C. 7. Add phase A to phase B while stirring. Homogenize. 8. Add part C below 70° C. 9. Cool down to room temperature. Add ingredients of phase D below 40° C

Notes:

• Appearance: black, viscous paste pH: 6,5-7,5 • Viscosity: Approx. 50000 mPas (Brookfield DVII: spindle 7, speed 10) • Stability: Stable for more than 3 months at 20° C, 40° C and 4° C.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.