ANTI-FATIGUE DETOXIFYING CREAM
Ashland
Preparation:
1. In main vessel, add water and begin slow homogenization. Add Disodium EDTA and mix until completely dissolved. Heat to 70°-75°C. 2. In side vessel, add all Phase B ingredients. Heat to 70°-75°C with mixing. 3. Add Phase B to Phase A using homo-mixing. Homogenize for 10 minutes. Begin cooling. 4. Cool to 60°-65°C and add Phase C one by one with mixing. 5. Cool to 40°-45°C and add Phase D one by one with mixing. 6. Switch to sweep blade and cool batch to room temperatureNotes:
Appearance: White, opaque cream pH: 5.75—6.25 Viscosity: Brookfield RVT/spindle TC/5 rpm/25°C/1 minute: 65,000—80,000 cpsDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Good Face Project is beauty’s only cloud-based, AI-powered Formulation, Regulatory Compliance, and PLM Software. Since 2018, Good Face has been building the world's largest centralized International Nomenclature Cosmetic Ingredient (INCI) database which encompasses up-to-date scientific research, worldwide regulations, retail policies and...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025