Anti-Acne Exfoliating Cream NAD025-08-17
Preparation:Prepare phase A and phase B separately. Heat both to 75°C–80°C. Add phase B to phase A at 70°C–75°C and homogenize using a suitable dispersion unit (e.g. Silverson, Ultra Turrax, etc.). Cool to 40°C using a water bath while stirring. Add phase C and homogenize using a suitable dispersion unit. Add phases D and E one by one and homogenize using a suitable dispersion unit.
Notes:Properties Appearance: A gentle skin polisher that smoothes and refines skin. Viscosity: 28,000 – 35,000 mPa•s (10 rpm, Brk. RVDV-E, Sp. T-C, after 24 h at room temperature) pH: 5.5 – 6.5 Suppliers 1 Sigma Aldrich 2 Clariant 3 HallStar Italia 4 BASF 5 Evonik 6 ACEF
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.