Shaving Foamer With Barla-Tein Pro SB1-87A 

Phase
Product
INCI Name
Supplier
Volume
A
Standapol ES-2 Standapol ES-2 
Sodium Laureth Sulfate 
Cognis 
20.00
VaMasoft Cocoa  
Sodium cocoabutteramphoacetate
TRI-K/Res Pharma 
2.00
Satinfeel SMC
Water, Sodium lauroyl lactylate, Sodium cocoyl isethionate, Sodium lauroyl glutamate
TRI-K 
2.00
Glucamate™ DOE-120
PEG-120 Methyl Glucose Dioleate 
Chemron Corp.
1.40
DL Panthenol 
Panthenol 
TRI-K 
0.70
B
Water
68.50
Hampene®NA2 
Disodium EDTA 
Akzo Nobel 
0.05
Barla-Tein Pro
Hydrolyzed Barley Protein 
TRI-K /Maybrook
5.00
Neolone PE 
Phenoxyethanol (and) Methylisothiazolinone 
Rohm &Haas
0.35

Preparation:

1. Add phase A ingredients individually and slowly mix ensuring uniformity after each addition by heating up to 70°C. Mix until uniform  2. Premix phase B and add to phase A maintaining the temperature.   3. Once the batch is completely uniform, begin cooling the batch.   

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.