Rinse Off Ethnic Hair Treatment Conditioner With Proto-Lan KT JD4-66
TRI-K Industries
Preparation:
1. Heat water to 60-65oC, then disperse Ucare JR 400 under propeller agitation. Continue heating to 70-75oC while adding remaining phase A ingredients. 2. Combine phase B ingredients and heat to 70-75o. 3. Add phase B to phase A, mix until uniform, then homogenize until smooth emulsion is formed. 4. Begin cooling batch while propeller mixing. 5. At 40oC or below, add phase CDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Founded in 1964, Sederma became a member of the Croda International Group in 1997. Sederma is dedicated to the development of active ingredients and in the creation of innovative concepts for Cosmetics, based on the mastery of biotechnology, fine chemistry and vegetal extraction.Located near Paris, all Sederma activities, from R&D and manufacturing...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
