SILKY-SMOOTH SUN GEL-CREAM SPF 35 6818B
Preparation:Disperse the SIMULGEL NS in water under turbulent agitation (marine propeller or butterfly propeller). Under the same type of agitation, add the oily phase in which the sun filters have previously been melted at 50-60°C.Then add preservatives and fragrance. We recommend final mixing of the cream-gel with an homogenizer to refine dispersion of the oily phase.
Notes:SIMULGEL NS:Thickening and emulsifying agent in very easy to use liquid form (no pre-dispersion or neutralization). Emulsifies all types of oily phases without heating. Provides a sensation of freshness followed by a melting effect on contact with the skin. It leaves a feeling of velvety softness. Characteristics Aspect Opaque thick gel pH 5 Viscosity >100,000 mPa.s BROOKFIELD LV4 6rpm Stability Stable at room temperature/40/50 Stable after freeze-thaw cycles -5/+40°C Stable when centrifuged 50°C 20’ 3000rpm Assessment In vitro SPF (measured after 1 month): 35 +/- 4.28 (% absorbed UVB=97 - % absorbed UVA=85) (SEPPIC 57CO033 method, vitro skin®, LABSPHERE® spectrophotometer) Notes Ethyl hexyl methoxycinnamate (octinoxate): UVINUL MC80 (BASF) Ethyl hexyl dimethyl PABA (padimate O): ESCALOL 507 (ISP) Ethyl hexyl salicylate (octisalate): ESCALOL 587 (ISP) Butylmethoxy dibenzoyl methane (avobenzone): PARSOL 1789 (GIVAUDAN) Diisopropyl adipate (distribution by SEPPIC in some countries - ask us) Fragrance: SOFT GEL C621450 (QUEST) 6818B - SEPPIC - A0104B
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.