Mineral Foot & Body Scrub
Preparation:1) Heat water until warm. 2) Add stirring bar to water to create a vortex and slowly add Rita PEO 18. If there are lumps left once all incorporated then homogenise to remove them. 3) Add panthenol, glycerin, glydant plus and surfactants. 4) Continue to stir and heat to 70°C. 5) Add Glydant Plus Liquid. 6) In a separate beaker mix and heat together all phase B materials to 70°C. 7) Once phase A is at 70°C remove from heat and stir in dye, pearl and perfume. 8) Homogenise phase B into phase A, both phases should be around 70°C when this is done. 9) Stir in Zeodent 9175. 10) Package whilst warm
Notes:All materials are available from Cornelius except those marked with * * Zschimmer & Schwarz, **Sensient Colors Ltd, ***Belmay
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.