SULFATE-FREE BODY WASH
Jeen International Corporation
Preparation:
Procedure Charge phase A water to the main mixing tank. Premix phase B and add to phase A. Mix for 15 minutes. Add phase C ingredients one at a time ensuring each is dissolved before adding the next. Heat batch to 65-70°C. Ensure the EGMS has completely melted and the batch is uniform. Cool batch to 50-55°C. Premix phase D and add to the batch. Add phase E ingredients one at a time ensuring each is dissolved before adding the next. Cool to room temperature.Notes:
Properties pH – 5.0 – 6.0 Suppliers 1 Aqualon 2 Jeen InternationalDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Devoted to Fragrances,Committed to Partners
Our purpose is to design and manufacture fragrances that enhance our customers’ brands and build consumer loyalty.We are a B2B company fully dedicated to our clients, with a single-minded focus on producing high quality perfumes for fine fragrances, home and personal care products.
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025