INTENSIVE FOOT CARE TREATMENT

Phase
Product
INCI Name
Supplier
Volume
A
Deionised water
q.s.
Xanthan Gum
0.40
BioVera 200X1
0.10
B
Crodacol CS-502
4.60
Peg-100 Stearate
3.60
Glycerin USP
5.00
Sal Butter1
1.50
Macadamia Seed Oil1
1.00
Stearic Acid
2.75
Squalane
1.00
Glyceryl Monostearate
2.00
Cyclomethicone
0.75
C
Deionised water
6.25
Caustic Soda 30%-NaOH/Deionised H20 solution
0.25
D
Diocide3
0.50
Phenoxetol
0.50
Menthol Crystals USP4
0.15
Salicylic Acid USP (powder)
0.20
E
Butylene Glycol
1.5
Mallow Extract
0.10
Thyme Extract
0.10
Krameria Extract
0.10
Fragrance
1.00-2.50
Simulgel 6005
0.60

Preparation:

Heat Water of phase A up to 80°C. On the way up to 80°C add Xanthan Gum and Aloe Powder and let swell for 10 minutes after target temperature is reached. Heat phase B up to 82°C and mix. Add phase B to phase A under moderate homogenisation. Homogenise for 10 minutes and begin to cool while continuing homogenisation. Add phase C at 60°C. Warm phase D as to melt all of the Menthol Crystals and add to main vessel at 45°C. Switch to paddle with side wiping action in main vessel. Add phase E except for Simulgel, at 35°C. Turn homogeniser back on and add Simulgel to main at 32°C. Homogenise until cream is thick with a glassy finish. Cool to room temperature.

Notes:

Suppliers 1 BioChemica 2 Croda 3 DIOW Inc. 4 CSCM 5 Seppic
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.