GELIFIED ‘EAU DE TOILETTE’
Preparation:Disperse phase B into phase A using a Turrax homogeniser. Prepare phase C and adjust to pH11–12 using NaOH and add to phase A+B until polymer in water is fully clear and neutralised. (Neutralise some more if needed – check pH is 4.75–5.00 of bulk). Add phase D drop-wise into bulk while mixing. Mix thoroughly until clear. Put into an appropriate container.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.