WATER-IN-OIL SELF-TANNING GEL
Jeen International Corporation
Preparation:
Phase A: Combine Cyclomethicone and Jeesilc PS-CM. Homogenise at a slow speed until uniform. Add in the Abil EM-97 and fragrance and mix well. Phase B: Combine the water and DHA and mix well until dissolved. Warm if necessary to dissolve all the DHA. Add in all other ingredients and mix until uniform. Adjust pH with Citric Acid. When phases are at room temperature, begin medium-speed homogenising agitation of phase A and very slowly add phase B. Viscosity will increase and sweep mixing is necessary. Once uniform, cool batch to room temperature.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
