Preparation:Stir phase A to homogeneity. Add phase B while stirring. Phase C: Adjust the pH value to approx. 2.8 with citric acid. Add phase D and stir to homogeneity. Then adjust the pH value to approx. 4.5 Note Formulations with Zetesol ZN need a pH value lower than approx. 5.0 otherwise Zinkoxide can be formed and precipitate. Properties Appearance: Clear liquid. Active matter: Approx. 13 % pH value: 4.0–4.5
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.