LOW VOC PUMPSPRAY

Wacker-Chemie AG
Phase
Product
INCI Name
Supplier
Volume
A
AMP 30%ig1
Aminomethyl Propanol
0.50
Ethanol + 1% MEK
Alcohol Denat.
10.00
Wacker-Belsil® P1012
Crotonic Acid/Vinyl C8-12 Isoalkyl Esters/VA/Bis-Vinyldimethicone
3.00
B
Water
Aqua (Water VES)
86.50

Preparation:

Phase A: Calculate the amount of base AMP that 100% of acid units of the polymer are neutralised. Add the calculated amout of AMP under stirring in the ethanol. Add than the polymer under stirring and stirr until it is dissolved. Add then the phase B to phase A.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

17th Sun Protection Conference 2025

Royal College of Physicians, London
24 - 25 June 2025

in-cosmetics Korea 2025

COEX, Seoul
2nd - 4th July 2025