CALMING WIPES
Schulke & Mayr GmbH
Preparation:
Procedure Swell Simulgel NS in water. Add successively the ingredients of phase B and homogenise with a rotor stator mixing head for 4 minutes at 3,000 rpm (TRIMIX 7 kg). Then complete with water and homogenise again 4 minutes at 3,000 rpm. Add the ingredients of phase D and start final homogenisation for 4 minutes at 3,000 rpm. We recommend an amount of 250% of solution based on the dry weight of the wipe for the substrate SPUNLACE viscose/polyester 65/35 55 g/m2. Properties pH: 6.8 Viscosity: 205 mPa.s Brookfield LV 6 rpmNotes:
Suppliers 1 Seppic 2 Schülke & Mayr GmbHDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
We believe that it's possible to replace synthetic raw materials in cosmetic formulations, without compromise. Our easy-to-use, naturally-derived blends are created using safe, raw materials and provide high-performance alternatives to synthetic products.
Details of our full product range can be viewed here.
Interested in our products? ...
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025