Preparation:Procedure Melt MONTANOV L and introduce hot water (80°C) while mixing with a rotor stator equipment. Then introduce the silicon oil and maintain homogenization for 3’ (rotor stator: for 2kg DUMEK). At approx. 30°C introduce preservatives and fragrance.
Notes:Comments MONTANOV L Glucolipid emulsifier in harmony with nature. MONTANOV L is especially useful to produce fluid formulas whatever the type or quantity of oil phase used. MONTANOV L has a shear-thinning profile that is stable over time and well-adapted to the formulation of sprayable emulsions. MONTANOV L can promote liquid crystals according to the emulsion diagram, creating water reservoirs within the emulsion to help maintain skin moisturization Characteristics Appearance white and fluid pH 6.3 Viscosity 1,500 mPa.s BROOKFIELD LV 6rpm Stability Stable at room temperature/40°C/50°C Stable 18h at –18°C Stable when centrifuged 20’ et 3000 rpm Notes Fragrance: fruit d’été RS11044 (TECHNICOFLOR) Cyclomethicone: DC345 (DOW CORNING) 6914 – SEPPIC – A0302
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.