HEAT ACTIVE CONDITIONER
Croda Europe Limited
This heat-activated conditioner utilizes ArlasilkTM Phospholipid PLN to provide excellent wet comb, anti-static, sheen and dry comb properties to hair.
Di Water
83.08
ArlasilkTM Phospholipid PLN
1
4.00
Propylene glycol
1.00
Cetearyl alcohol
4.00
Brij® 721S
2
3.47
Quaternium-18
2.00
Cyclomethicone
2.00
Preparation:
Procedure Mix ingredients except cyclomethicone while heating to 65-70°C. Cool to 60-63°C, add cyclomethicone. Agitate until uniform. Cool to 40-45°C. Add colour, fragrance and preservative. Package.
Notes:
1 Linoleamidopropyl PG-Dimonium Chloride Phosphate Dimethicone (Uniqema) 2 Steareth-21 (Uniqema)
Typical Properties: pH: 6 Viscosity @ 25°C: 15,500 cP
Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
IFSCC Congress 2026
Perth Convention & Exhibition Centre, Perth, Australia
28th September - 1st October
SEPAWA Congress 2026
Estrel Congress Center Berlin
14 - 16 October
