FLASH FORWARD Peel-Off Mask
Berkem
Preparation:
Part 1 - Stick Mask Perform a double boiler at 85°C. Put A under agitation in the water bath at 85°C, mixing well. Add B and, under vigorous stirring, continue for 10 minutes in the bath until fully incorporated. Homogenize the alginate at 2000 RPM. Check the temperatures before emulsification. Add C drop by drop, be careful to add only the good weigh. Lower the speed to 1000 RPM and continue homogenizing in the double boiler. Pour into molds using a piping bag, be careful it's hot. Part 2 Phase D - Activation Solution Protocol : Mix until total dispersion of the calcium granular.Notes:
Flashforward Protocol of use 1-Apply Open the stick. Twist the bottom until a sufficient amount of product appears at the top of the stick. Apply generously on the skin. Leave on for 5 minutes. 2-Reveal To remove the mask, spray the activation solution. Leave on for 1-3 minutes. Gently remove the film.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
About Us
Our team is here to understand your challenges and help you reach the next level
Founded in 2018 in Portugal, a country with a deep connection to the sea, we set out to redefine marine biotechnology by harnessing the ocean’s untapped potential.
At Ínclita Seaweed Solutions (ISS), we believe seaweed holds the key to a...
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
NYSCC Suppliers' Day 2025
Javits Center, New York
3rd - 4th June 2025
