HOT SPOT UPLIFTING GEL
Clariant GmbH
Preparation:
Mix the ingredients of phase (A) and homogenize it for 15 min. with medium stirring. Add phase (B) into phase (A) under stirring and homogenize until form the gel. Pre-mix phase (C) and add into (A+B) phase while stirring. Add phase (D) into phase (A+B+C) while stirring. Check the pH and if necessary, adjust to 5.0-5.5Notes:
Appearance: White gel cream Viscosity (Brookfield, 25°C, 20 rpm): 6000-6500 cPs pH: 5.1Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Founded in 1964, Sederma became a member of the Croda International Group in 1997. Sederma is dedicated to the development of active ingredients and in the creation of innovative concepts for Cosmetics, based on the mastery of biotechnology, fine chemistry and vegetal extraction.Located near Paris, all Sederma activities, from R&D and manufacturing...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025