Clear SPF 30 Primer
Preparation:
To a secondary vessel add phase A and heat to 70 - 80°. Add phase B with mixing until uniform, then add phase C. Start cooling with mixing to room temperature. When below 50°C, add phase C and mix until uniform.Notes:
Properties (25°C) Appearance: Soft gel Viscosity (20 rpm, Brk, RV DV-II, T-D, after 24 hours at room temperature; mPa∙s): 30,000 – 50,000Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Featured Supplier
Floratech provides innovative botanical ingredients to formulators of stable, functional and quality cosmetic and personal care products worldwide.
Floratech has grown naturally from the ground up. We started with a small jojoba oil mill in the Sonoran Desert. Over the past 40 years we have grown into a modern botanical derivative research and...