Bubble Scrub Butter
Innospec
Preparation:
1. Mix (A) with gentle mixing and heat to 55 – 60°C. 2. Premix sunflower oil with the Vitamin E acetate (B) and add the premix to the formula (A). 3. Mix until a homogeneous butter is formed and then start cooling down to room temperature. 4. At 40°C, add the preservative (C). 5. Continue mixing until the temperature reaches 30°C and add the exfoliating powders (D) and mix until homogeneous.Notes:
Scoop out a small amount from the tin, add water and apply to the desired area to produce the soft, creamy foam. Rinse off with warm water. Appearance: Thick, off-white paste with exfoliating particles pH: 6.0 – 6.5 Stability: Passed 12 weeks at 45°C, 20°C and 5°C, 3 F/T cyclesDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Nagase Viita -Where beauty and biotechnology thrive
With a deep insight into biotechnology and science, Nagase Viita develops unique functional saccharides and saccharide-based active ingredients utilizing enzymes and fermentation through sustainable manufacturing.
Followed by 140 years of history for exploring glycoscience...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025