Avo-Char Bar For Men
Innospec
Preparation:
1. In a well-ventilated area mix all the solid ingredients together (Phase A). Mix until homogeneous 2. Add all the liquid ingredients (Phase B). Mix until homogeneous. 3. Add to moulds (≈25-30g) and compress at 60-100psi at room temperature. 4. Remove bars from moulds and allow to harden at ambient temperature before wrapping. This hardening can be quickened by storing bars at elevated temperatures (30-35°C) if required.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
DERMACLAIM – COSMETIC TESTING LABORATORY
Dermaclaim Lab is a Dermocosmetic Testing Laboratory focused on the Substantiation of Efficacy Claims for active ingredients and end-products, through in vitro bioassays and clinical testing in human volunteers.
Our R&D testing services help you to demonstrate the efficacy of your...
in-cosmetics Asia 2025
BITEC, Bangkok, Thailand
4th - 6th November 2025
SCS Formulate 2025
Coventry Building Society Arena, UK
11th - 12th November 2025
