Recovery Hair Mask
Preparation:Procedure Prepare phase A and phase B separately. Heat to 75°C–80°C. At 75°C, add phase B to phase A under agitation, using a suitable dispersion unit (e.g., Silverson, Ultra Turrax). Homogenize for a few minutes, then cool under gentle stirring. Add C when AB is at 40°C. Mix until uniform and at desired filling temperature.
Notes:Properties (25°C) Appearance: White shiny cream Viscosity (20 rpm, Brk, RVDV-E, Sp 4, after 24 hours at room temperature, mPa∙s): 3000–7000 pH (100%): 3.5–4.0 *Patented and patent pending
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.