Anti-Age Cream With Floraesters

This substantive, skin-conditioning cream shows a reduction in the appearance of fine lines. Floraesters 20 and Floraesters 30 provide natural, oilfree emolliency while Floraesters K-20W Jojoba serves a dual purpose, providing a natural moisture barrier while neutralizing the polymer system. Long-term skin moisturization is achieved with the use of this lotion, resulting in a cream to combat the appearance of fine lines.
Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
Water
- - - - -
63.40
Carbopol® Ultrez 10 Polymer
Carbomer
The Lubrizol Corporation
0.25
Glycerin, USP
Glycerin
The Dow Chemical Co.
3.50
Preservative1
- - - - -
- - - - -
q.s.
B
Brij® S10
Steareth-10
Croda, Inc.
1.50
Crodafos CES
Cetearyl Alcohol (and) Dicetyl Phosphate (and) Ceteth-10 Phosphate
Croda, Inc.
3.50
Xiameter® PMX-200 Silicone Fluid
Dimethicone
Dow Corning Corporation
2.00
Floraesters 20
Jojoba Esters
Floratech
1.50
Floraesters 30
Jojoba Esters
Floratech
4.50
Span 60
Sorbitan Stearate
Croda, Inc.
0.40
C
Preservative2
- - - - -
- - - - -
q.s.
D
Deionized Water
Water
- - - - -
q.s.
Floraesters K-20W Jojoba
Hydrolyzed Jojoba Esters (and) Water (Aqua)
Floratech
4.00
E
Deionized Water
Water
- - - - -
5.00
Florasolvs® PEG-150 Hydrogenated Jojoba
Jojoba Oil PEG-150 Esters
The HallStar Company
1.00

Preparation:

Mixing Procedure 1. Place the Carbopol Ultrez 10 Polymer into the deionized water at room temperature. Allow the Carbopol Ultrez 10 Polymer to completely hydrate. Heat the solution to 70°C with propeller agitation. 2. Disperse the preservative in the Glycerin, USP and heat the mixture to 70°C. Add this to Phase A with propeller agitation. 3. Mix all components of Phase B together and heat to 70°C. With rapid propeller agitation, add Phase B to Phase A to form an emulsion. 4. Add Phase C to Phase AB with fast propeller agitation.3 Mix until a smooth cream is formed. 5. Disperse the Floraesters K-20W Jojoba in the deionized water of Phase D and add to Phase ABC with fast propeller agitation.3 6. Dissolve the Florasolvs PEG-150 Hydrogenated Jojoba in the deionized water of Phase E at 70°C. Add Phase E to Phase ABCD with propeller agitation. Cool the mixture to room temperature and put into tubes or jars.

Notes:

Typical Properties: pH: 4 - 5 Viscosity: ≥ 120,770cP 1 Preservative: Microcare® MHB (INCI: Methyl Paraben) and Microcare® OHB (INCI: Propylparaben) supplied by Thor Specialties 2 Preservative: Sodium Benzoate NF-FCC Dense (INCI: Sodium Benzoate) supplied by American International Chemical 3 Homomixer can be used if necessary.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.