Moisture Elements Body Wash

Moisture Elements Body Wash contains building blocks for healthy and moisturized skin. Floraesters K-100 Jojoba creates a mild wash product with a favorable foam profile that results in the extended retention of creamier foam. In addition, the combination of Floraesters K-100 Jojoba and glycerin is clinically shown to improve skin hydration (ref. CS 09-0151).
Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
Water
- - - -
q.s
Versene® Na2 Crystals
Disodium EDTA
The Dow Chemical Co
0.35
B
Iselux®
Sodium Lauroyl Methyl Isethionate
Innospec Performance Chemicals
15.00
Amisoft® CS-11
Sodium Cocoyl Glutamate
Ajinomoto Co. Inc.
4.00
Chembetaine® C Surfactant
Cocamidopropyl Betaine
The Lubrizol Corporation
7.00
Plantaren® 2000 N UP
Decyl Glucoside
BASF Corporation
7.00
C
Floraesters K-100 Jojoba
Hydrolyzed Jojoba Esters (and) Jojoba Esters (and) Water (Aqua)
Floratech
1.25
Glycerin, USP
Glycerin
The Dow Chemical Co.
2.00
Glycerox 767
PEG-6 Caprylic/Capric Glycerides
Croda, Inc
0.60
Florasolvs® PEG-16 Macadamia
PEG-16 Macadamia Glycerides
The HallStar Company
1.25
Fragrance2
- - - -
- - - -
q.s.
D
Sodium Chloride
Sodium Chloride
The Kroger Co.
1.50
Citric Acid, Anhydrous, USP
Citric Acid
Archer Daniels Midland Company
q.s.
E
Preservative3
- - - -
- - - -
q.s.

Preparation:

Mixing Procedure 1. Heat the deionized water of Phase A to 70°C. Add the Versene Na2 Crystals to the deionized water and mix until completely dissolved. 2. Add the Iselux of Phase B to Phase A. Mix until completely dissolved. Slowly add the Amisoft CS-11. Mix until completely dissolved. Add the remaining ingredients of Phase B. Maintain a temperature of 70°C. 3. Mix and heat ingredients of Phase C to 70°C. Add to Phase AB. Reduce temperature to 40°C. 4. Slowly add the Sodium Chloride to Phase ABC. Add the Citric Acid, Anhydrous, USP to achieve pH 5.5. 5. Add the preservative. Cool to room temperature.

Notes:

1 Floratech Claim Sheet CS 09-015: Increased Skin Hydration with Floraesters K-100 Jojoba 2 Fragrance: Green Clover and Aloe HS supplied by Symrise GMBH & Co. 3 Preservative: Kathon® CG [INCI: Methylchloroisothiazolinone (and) Methylisothiazolinone] supplied by The Dow Chemical Co. Typical Properties: pH: 5 - 6 Viscosity: 700 - 1700cP
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.