TAN ACCELERATOR SPRAY
Preparation:Manufacturing Procedure: 1. Heat A and B up to 70-75°C. Keep A under medium stirring for 20 minutes to hydrate phospholipids. 2. Add B into A under maximum stirring and maintain stirring rate for 3 minutes to emulsify. 3. Cool down under medium stirring. 4. Add C, D and E below 40°C. 5. Adjust the pH if necessary.
Notes:Formula Specifications: Aspect: Off-white fluid lotion Viscosity (Rheo ELV 8, spindle 4, 6 rpm, 3 min): 1 500 – 2 500 mPa.s pH: 5.2 - 5.5 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.