HYDRATING FIRMING LOTION

• Light texture • Restructuring effect
Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
Water
- - - - -
78.50
Dissolvine® Na
Tetrasodium EDTA
Univar
0.10
Glycerin
Glycerin
Interchimie
2.00
Chlorphenesin
Chlorphenesin
Azelis
0.10
B
Grape Seed Oil
Vitis Vinifera (Grape) Seed Oil
IES Labo
5.00
Phytosqualane
Squalane
Sophim
5.00
Cetiol® SB 45
Butyrospermum Parkii (Shea) Butter
BASF
2.00
Dermofeel® E 74 A
Tocopheryl Acetate
Dr Straetmans*
0.10
Dekaben C4
Phenoxyethanol (and) Methylparaben (and) Ethylparaben (and) Butylparaben (and) Propylparaben
IMCD
0.50
Heliogel™
Sodium Acrylates Copolymer (and) Hydrogenated Polyisobutene (and) Phospholipids (and) Polyglyceryl-10 Stearate (and) Helianthus Annuus (Sunflower) Seed Oil
Lucas Meyer Cosmetics
2.50
C
Hydraporine™
Betaine (and) Water (and) Glycerin (and) Hydrogenated Lecithin (and) Honey (and) Pectin
Lucas Meyer Cosmetics
4.00
D
FDC Blue 1
CI 42090
SensientCosmetic Technologies
Up to color
FDC Yellow 5
CI 19140
SensientCosmetic Technologies
Up to color
E
C3847
Fragrance
Vanessence
0.20

Preparation:

Manufacturing Procedure: 1. Heat A and B up to 60°C. 2. Add B into A under strong stirring. Keep under stirring until the product is thick and homogeneous. 3. Cool down. 4. Add C below 40°C and mix until the product is homogeneous. 5. Add D and E below 35°C and mix under slow stirring until the product is homogeneous. 6. Adjust the pH if necessary.

Notes:

Formula Specifications: Aspect: Green, fluid, bright lotion Viscosity (RHEO ELV8, Spindle 4, 60 rpm, 30 s): 4 000 - 4 500 mPa.s pH: 5,5 - 6,0 Centrifugation (3000 rpm, 20 min): Stable
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.