COCOON RELAX

• Light texture • In situ mousse • Paraben free
Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
Water
- - - - -
60.50
Dermofeel® PA-3
Sodium Phytate (and) Water (and) Alcohol
Dr Straetmans*
0.10
Glycerin
Glycerin
Interchimie
3.00
Amisol™ Soft
Behenyl Alcohol (and) Glyceryl Stearate (and) Lecithin (and) Glycine Soja (Soybean) Sterols
Lucas Meyer Cosmetics
3.00
FDC Red 4 Solution 0.1%
Water (and) CI 14700
Sensient® Cosmetic Technologies
0.50
FDC Yellow 5 Solution 0.1%
Water (and) CI 19140
Sensient® Cosmetic Technologies
1.50
B
Dermofeel® SL
Sodium Stearoyl Lactylate
Dr Straetmans*
2.00
Vitapherole® E-1000
Tocopherol (and) Helianthus Annuus (Sunflower) Seed Oil
VitaeNaturals
0.50
Dub Inin
Isononyl Isononanoate
Stearinerie Dubois
4.00
Lipex®102
Butyrospermum Parkii (Shea) Butter
AAK
8.00
Crodamol™ W
Stearyl Heptanoate
Croda
4.00
C
Heliogel™
Sodium Acrylates Copolymer (and) Hydrogenated Polyisobutene (and) Phospholipids (and) Polyglyceryl-10 Stearate (and) Helianthus Annuus (Sunflower) Seed Oil
Lucas Meyer Cosmetics
2.00
D
Hydraporine™
Betaine (and) Water (and) Glycerin (and) Hydrogenated Lecithin (and) Honey (and) Pectin
Lucas Meyer Cosmetics
4.00
Exo-H™
Butylene Glycol (and) Alteromonas Ferment Filtrate
Lucas Meyer Cosmetics
1.00
E
Relax 2020/2
Fragrance
Vanessence
0.40
F
Deionized Water
Water
- - - - -
3.00
Sodium Bicarbonate
Sodium Bicarbonate
- - - - -
0.50
G
Dermosoft® 1388
Glycerin (and) Water (and) Sodium Levulinate (and) Sodium Anisate
Dr Straetmans*
2.00
H
Citric Acid Solution 15%
Water (and) Citric Acid
- - - - -
Up to pH<5.5

Preparation:

Manufacturing Procedure: 1. Heat A and B up to 70-75°C. Keep A under slow stirring for 20 minutes. 2. Add B in A. Keep under slow stirring for 5 minutes. 3. Increase stirring rate up to maximum speed with a rotor stator blender (ex: Silverson for 2 minutes at 3000 rpm). 4. Add C and homogenize for 1 minute. 5. Cool down under medium stirring. 6. Add D, E, F and G. 7. Add H under strong stirring. CO2 is formed due to the neutralization of F and forms the foam.

Notes:

Formula Specifications: Aspect: Supple, bright, light pink emulsion Viscosity (RHEO ELV8, Spindle 4, 6 rpm, 3 min): 55 000 - 65 000 mPa.s pH: 5.0 - 5.5 Centrifugation (3000 rpm, 20 min): Stable - foam on the surface due the aeration of the formula. * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.