BODY CONTOURING SERUM
Lucas Meyer Cosmetics by Clariant
Preparation:
Manufacturing Procedure: 1. Heat A and B up to 75-80°C. 2. Keep A under slow stirring for 20 minutes. 3. Add B into A and keep under maximum stirring for 3 minutes. 4. Cool down under medium stirring. 5. Add premix C, and then ingredients of D and E one after the other below 35°C. 6. Adjust the pH if necessary.Notes:
Formula Specifications: Aspect: Light beige, smooth and homogeneous serum. Viscosity (Rheo ELV-8, spindle 4, 3 min, 6 rpm): 10 000 - 15 000 mPa.s pH: 4.5 - 5.0 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions. **= Non compliant with Ecocert standards.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
SNF, headquartered in Andrézieux, France, is a leading global producer of water-soluble polymers with primary manufacturing sites in France, the USA, and China. In 2024, SNF reported a turnover of $5.1 billion. Over the last 40 years, SNF has developed expertise in polymer chemistries designed for specialty markets, such as personal care and...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
