NEOSKIN
Lucas Meyer Cosmetics by Clariant
Preparation:
Manufacturing Procedure: 1. Heat A and D up to 70-75°C. 2. Add B into A and stir until the gel is fully developed. 3. Add C into AB. 4. Keep ABC at 70-75°C under slow stirring for 20 minutes to hydrate phospholipids. 5. Add D into ABC under medium stirring and keep under stirring for 5 minutes to emulsify. 6. Increase stirring rate up to maximum level for 3 minutes to homogenize the emulsion. 7. Cool down under medium stirring. 8. Add E (ingredients one by one), F, G and H below 40°C. 9. Adjust the pH if necessary.Notes:
Formula Specifications: Aspect: Pink thick and homogeneous cream Viscosity (Rheo ELV 8, spindle 4, 6 rpm, 3 min): 60 000 - 85 000 mPa.s pH: 5.0 - 5.5 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
