Spray 'N Go Sunblock
Preparation:Mixing Procedure 1. Mix the Floraesters K-20W Jojoba with the Ethanol Solutions 3, UN 1170, PG II, SDA 40-2, 200 Proof until completely dissolved at room temperature. 2. Mix the Escalol 567 with the Floramac 10 until completely dissolved at room temperature. Add this mixture to Phase A. Add the remaining components of Phase B to Phase A in order until completely mixed. 3. Add Phase C directly to Phase AB. Pour formula into spray bottles for use.
Notes:Note: The information herein is based on our research and the research of others and is believed to be accurate. No guarantee of accuracy is made and the products are provided without warranty, expressed or implied and upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes. Likewise, statements concerning the possible use of these products are not intended as recommendations to use these products in infringement of any patent or in the treatment, prevention, or cure of any medical condition. INCI/trade names must be verified with each manufacturer. (Cleared for Public Disclosure)
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.