W/O Moisturiser KC 1.64

Hydrior AG

Phase

Product

INCI Name

Supplier

Volume

HYDRIOL® PGI

Polyglyceryl-4 Isostearate

Hydrior, CH-Wettingen

2.7

Aluminium stearate

0.10

Magnesium stearate

0.80

Phytosqualane

Squalane

Sophim, FR-Peyruis

5.3

Decyl oleate

4.0

Isopropyl myristate

Symrise, DE-Holzminden

2.7

Tocopheryl acetate

BASF, DE-Ludwigshafen

0.10

Urea

9.0

Magnesium sulphate · 7 Hydrate

Magnesium sulphate

0.40

Preservative

Water

74.6

Perfume

Preparation:

Weight in all ingredients for the oil phase and heat up to approx. 100 °C until the phase is clear. Cool down to approx. 75 °C. Heat the aqueous phase to approx. 75 °C. Add the aqueous phase within approx. 20 minutes while stirring. Hold the temperature at least at 70 °C. After the addition of the aqueous phase cool the mixture down to 50 - 60 °C. Homogenize with a rotor/stator system at approx. 10'000 rpm for three minutes and for a further minute after cooling down to approx. 35 °C and after adding the perfume. The emulsion can be bottled after cooling down to 25 °C.

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Featured Supplier

Coptis Software Solutions for Cosmetic R&D

COPTIS offers performance software solutions specifically designed for Cosmetic R&D laboratories. Our team of cosmetic chemists and IT specialist is dedicated to the continuous improvement of our products by utilizing the benefits of our cosmetic expertise, Users Club and direct recommendations from our clients. Our main goal is to ensure that...

Learn more »