W/O Moisturiser KC 1.45
Hydrior AG
Preparation:
Weight in all ingredients for the oil phase and heat up to approx. 100 °C until the phase is clear. Cool down to approx. 75 °C. Add the aqueous phase within approx. 20 minutes while stirring. Hold the temperature at least at 70 °C. After the addition of the aqueous phase cool the mixture down to 50 - 60 °C. Homogenize with a rotor/stator system at approx. 10'000 rpm for three minutes and for a further minute after cooling down to approx. 35 °C. The emulsion can be bottled after cooling down to 25 °C.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Gattefossé is a French-heritage raw material supplier that has grown alongside the world’s leading cosmetics brands. Since our inception in 1880, our journey has been guided by a commitment to excellence and dedication to products shaped with care and time.
We truly believe in the limitless potential of the plant world and continuously explore...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
