Men's After Shave Balm J7-1A
Jeen International Corporation
Preparation:
1 Add phase A to the main tank. Then add phase B and mix well. 2 Add phase C and mix well. Add phase D and mix until uniform. 3 Add phase E one at the time and mix until uniform. Mix for 15 minutes with a homogenizer 4 After 15 minutes, switch to prop agitation and add phase F. Mix well. 5 Add phase G and mix well. 6 Adjust pH with if necessaryNotes:
Product Specifications pH 6.0 -7.0 Initial Viscosity 6,200 spTB@10RPM (RVT) 24 hour viscosity 6,800cps spTB@10RPM (RVT)Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
ROELMI HPC is the partner company to drive innovation in the Health & Personal Care markets.
ROELMI HPC is research, planning, development and production of functional, active and performance ingredients. These activities are possible thanks to cutting-edge technologies driven by innovation in the green chemistry and by the will of building...
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
NYSCC Suppliers' Day 2025
Javits Center, New York
3rd - 4th June 2025
