Ecohancing Hair Conditioner NAD044-09-13D
Hallstar Italia Srl
Preparation:
Prepare phase A and phase B separately. Warm each to 75°C. Disperse the thickeners in the water phase using a suitable dispersion unit, such as Silverson, Ultra-Turrax. etc. Add phase A to phase B under agitation at 75°C. Homogenize for a few minutes. Cool under gentle stirring. Add phase C when batch is below 40° C. Adjust the pH between 5.0 and 5.5.Notes:
Properties VISCOSITY: 5,000 – 9,000 mPa?s (20 rpm, Brk. RVDV-E, Sp. T-5, after 24 h at room temperature pH: 5.0 – 5.5 Suppliers 1 Sigma Aldrich 2 Rhodia 3 FMC Corporation 4 HallStar Italia 5 HallStar 6 BASF 7 Biochim 8 Sigma Aldrich 9 Schülke & Mayr 10 EsperisDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
bitop - the global market leader and expert for biotechnological manufacturing & development of extremolytes Made in Germany. Extremolytes, natural stress protection molecules, are unique multifunctional ingredients with an outstanding efficacy. Ectoin® natural “the ultimate protection & repair” and Glycoin® natural “the cell energizer” are...
IFSCC 2024
Recanto das Cataratas Thermas Resort, Iguazu Falls, Brazil
14th - 17th October 2024
SEPAWA
Estrel Congress Center, Berlin
16th - 18th October 2024
