SCALP PROTECTION SHAMPOO WITH LIPONATE® SB-50 NO. 1620

This scalp protection shampoo contains Liponate® SB-50 for the protective attributes of shea butter. It leaves the scalp moisturized and the hair soft and conditioned.
Phase
Product
INCI Name
Supplier
Volume
A
Celquat SC-240C (92)
Polyquaternium-10
0.25
Deionized Water
Water
58.20
Disodium EDTA (119)
Disodium EDTA
0.10
B
Standapol ES-2 (20)
Sodium Laureth Sulfate
25.00
Decyl Glucoside
Decyl Glucoside
3.00
Velvetex BK-35 (20)
Cocamidopropyl Betaine
8.00
Liponate® SB-50 (1)
PEG-50 Shea Butter
3.00
C
Polytex 10M (1)
Glycol Stearate (and) Stearamide AMP
1.00
D
Panthenol (119)
Panthenol
0.50
E
Sodium Chloride (119)
Sodium Chloride
0.95
F
Preservative
Preservative
qs

Preparation:

1. Combine Sequence #1 ingredients in main vessel and heat to 75-80°C with propeller mixing. 2. When Polyquaternium-10 is fully hydrated and clear, add Sequence #2 ingredients to main vessel and continue heating and mixing. 3. When batch temperature is 75-80°C add Sequence #3 to main vessel. Hold at temperature while mixing for 5 minutes. 4. With continued mixing, slowly cool the batch. 5. When batch reaches 25°C add Sequence #4 , #5, and #6 with mixing, batch will thicken.

Notes:

(1) Lipo Chemicals, Inc. (20) BASF (Cognis) (92) Akzo Nobel Personal Care (119) Ruger Chemical, Co. Inc.. pH: 6.00 + 0.50 Viscosity: LV4 @ 1.5 rpm = 14,400 cps ± 10% Stability: 1 month at 50°C
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.