Personal Hygiene Cleanser
Desert King International
Preparation:
Preliminary phases Prepare a 25% solution of Andean QD Ultra in deionised water under cupboard Phase B: Mix the ingredients until clear solution; Phase D: Add Veegum HV to water and heat to 80°C while homogenizing with turbine and blades. At this temperature homogenize for 10’ and then start to cool to room temperature while mixing with blades. Phase E: Mix the ingredients until clear solution; Addition scheme 1) In main mixer add ingredients A and mix until clear solution after each addition. Then add A1 and homogenize for 5’; then heat the phase to 40°C and at this temperature homogenize the phase for 5’. 2) Add A2 and homogenize for 10’. Check homogeneity. 3) Add phase B and homogenize with turbine and blades under vacuum for 5’. 4) Add C and homogenize with turbine and blades under vacuum for 5’. 5) Add phase D and homogenize with turbine and blades under vacuum for 5’. 6) Add phase E and mix with blades for 5’. Take a sample for analytical controls.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Silverson Machines, Inc.
355 Chestnut St. , East Longmeadow, MA 01028
Phone: 413-525-4825
Fax: 413-525-5804
Silverson Machines
High Shear Mixing Equipment for the Cosmetics and Personal Care Industries
Silverson experts understand the mixing challenges you face in the cosmetics industry, such as reducing...
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
NYSCC Suppliers' Day 2025
Javits Center, New York
3rd - 4th June 2025