Broad Spectrum SPF ~75, PFA (PPD) ~20 Water Resistant (Four Hours) Sunscreen Lotion JZ5-221

Hallstar

A water-in-oil (W/O), very-high-protection sunscreen emulsion four-hour water performance and SPF 50+. The extremely rapid and highly efficient singlet-state-quencher, SolaStay® S1, photostabilizes Ethylhexyl Methoxycinnamate (Octinoxate) and Butyl Methoxydibenzoylmethane (Avobenzone). SPF determined in vivo (10 subjects) on closely related J097-8. Critical wavelength = 376 nm

Phase

Product

INCI Name

Supplier

Volume

Water (aqua) (deionized)

41.10

Propylene Glycol USP1

Propylene Glycol

3.00

Versene™ NA1

Disodium EDTA

0.10

Rhodicare® XC2

Xanthan Gum

0.15

CoSept™ PEP3

Phenoxyethanol, Methylparaben, Ethylparaben, Butylparaben, Propylparaben, Isobutylparaben

0.60

Uvinul® MC804

Ethylhexyl Methoxycinnamate [Octinoxate]

6.00

Finsolv® TN5

C12-15 Alkyl Benzoate

10.00

Crodamol™ PTIS-LQ-(MH)6

Pentaerythrityl Tetraisostearate

5.00

HallStar® OP3

Ethylhexyl Palmitate

5.00

SolaStay® S13

Ethylhexyl Methoxycrylene

5.00

Parsol® 17897

Butyl Methoxydibenzoylmethane [Avobenzone]

5.00

Neo Heliopan® BB8

Benzophenone-3 [Oxybenzone]

6.00

HallStar® GMO3

Glyceryl Oleate

1.00

N.F. White Beeswax Wax # 421P9

Beeswax

1.50

Performalene™ 40010

Polyethylene

1.50

RTD™ Stearic Acid V-16553

Stearic Acid

0.20

Dehyrnuls® LE4

PEG-30 Dipolyhydroxystearate

3.00

Danox® 30011

BHA

0.10

Eusolex® T-AVO12

Titanium Dioxide, Silica

3.75

Sodium Chloride ACS13

Sodium Chloride

2.00

Preparation:

Water phase: Combine A in the main vessel. Add B and mix until totally dissolved. Disperse C and mix until uniform and lump free. Start heating to 70°–75°C and add D. Oil phase: In a separate vessel, combine E and start mixing. Add F and heat to 70°–75°C. Add phase G ingredients in order and continue mixing until uniform and molten. Disperse H and mix until uniform. When both phases are at least 70°C, slowly add the water phase to the oil phase and mix until uniform. Homogenize for 5 minutes. Continue mixing using an overhead stirrer while allowing batch to cool. Add I with mixing. Replace any water lost to evaporation. Mix until smooth and at desired filling temperature. Perform final quality assurance checks and package product.

Notes:

1 Dow Chemical 2 Solvay/Rhodia Novecare 3 HallStar 4 BASF 5 Innospec 6 Croda 7 DSM Nutritional 8 Symrise 9 Koster Keunen, LLC 10 New Phase Technology 11 Kao Chemicals 12 EMD 13 Sigma PRODUCT PROPERTIES Viscosity (RV, T-D, 5, 20 & 100 rpm; cP): 9600, 6100 & 3350 Appearance: Off white lotion pH: 4.5

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Featured Supplier

Still Growing! Over 3000m² and 160+ Exhibitors
Making Cosmetics is everyone’s chance in the personal care market to get up-to-the minute information, ideas and answers for formulating, sourcing, manufacturing and outsourcing, cosmetics and personal care products from start to finish. In addition with in-Vitality, we offer industry...

Learn more »