AP ROLL ON

Phase
Product
INCI Name
Supplier
Volume
A
EMULGADE® NLB
Steareth-2 (and) Ceteareth-12 (and) Stearyl Alcohol (and) Ceteareth-20 (and) Distearyl Ether
5.0
CETIOL® CC
Dicaprylyl Carbonate
4.5
Dow Corning 200 – 100cst (Dow Corning)
Dimethicone
1.5
B
Water, de-ionized
Aqua
48.2
C
Perfume 50-4106 (Kao)
Parfum
0.8
D
Locron L (50% sol.)
Aluminum Chlorohydrate
(Clariant)
40.0
Viscosity (mPas), Brook. RVT, 23°C, sp.TA, 20 rpm, with Helipath
3.200

Preparation:

Heat phase A to 80°C. Heat phase B to 80°C and add to phase A while stirring. Allow the emulsion to cool while stirring in such a way that it remains in continual motion. Avoid incorporation of air. Stir while cooling to 45°C and add phase C and phase D (if available). Stop stirring at 35°C to 30°C when you observe that the viscosity increase.

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.