SPF 30 Sun Spray
Alfa Chemicals Ltd
Preparation:
Heat the Sucragel AP to 70°C Mix together phase B and heat to 70°C Slowly, add phase B into the Sucragel under propeller mixer at quite a fast speed to form a gel. Disperse the Sucrathix in the water. Heat this mixture up to 70°C. Add the gel made with phase A & B into phase C using a homogeniser Cool down to room temperature and finally add phase D.Notes:
On Stability at 45°C. N.B Sucragel AP can be replaced with Sucragel CF The preservative system in this formulation has not been challenge tested. Other systems can be used. White thin liquidDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
17th Sun Protection Conference 2025
Royal College of Physicians, London
24 - 25 June 2025
in-cosmetics Korea 2025
COEX, Seoul
2nd - 4th July 2025
