W/O Urea Cream KC 1.82
Hydrior AG
Preparation:
Weight in all ingredients for the oil phase and heat up to approx. 100 °C until the phase is clear. Cool down to approx. 75 °C. Add the cold aqueous phase while stirring within 20 minutes. Hold the temperature at least at 70 °C. After the addition of the aqueous phase cool the mixture down to 50 - 60 °C. Homogenize with a rotor/stator system at approx. 10'000 rpm for two minutes. The emulsion can be bottled after cooling down to 25 °C.Notes:
Formulations with urea contents above 15 % are not recommended as cosmetic application! Danger of skin damage!Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At The FOREFRONT
Everything started at the forefront of sea explorations, between the Varde and Grouin headlands, on the edge of Brittany, a vantage point that affords broad views and a look out to sea. The sea is at the same time our source of inspiration and our primary source of creation.
At the forefront of innovation, we never stop...
17th Sun Protection Conference 2025
Royal College of Physicians, London
24 - 25 June 2025
in-cosmetics Korea 2025
COEX, Seoul
2nd - 4th July 2025