Preparation:Phase A is prepared by mixing and heating deionised water, EDETA BD and Glycerin to 75°C.At 75°C Carbopol EDT 2020 is dispersed. Phase B is prepared by mixing and heating 75°C until a clear, virtually colourless solution has been obtained. When homogeneous and at 75°C, add oil phase B to water phase A with high shear mixing for 10-15 minutes. Neutralise with TEA and mix for a further ten minutes The emulsion is cooled to 30-35°C, and Tri-Sodium Citrate,Vitamine E Acetate, Phenonip, HYDRALYS and MAGNALYS are added. Add fragrance if desired. Mix until uniform.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.