Anti-Aging Moisturizing Cream With Retinyl Palmitate Formula JZ4-80

Hallstar

Phase

Product

INCI Name

Supplier

Volume

Water (aqua) (deionized)

68.45

Versene ™ NA1

Disodium EDTA

3.00

Carbopol® ETD 20502

Carbomer

0.05

Propylene Glycol USP3

Propylene Glycol

0.20

CoSept™ PEP4

Phenoxyethanol, Methylparaben, Ethylparaben, Butylparaben, Propylparaben, Isobutylparaben

0.60

Triethanolamine 99%1

Triethanolamine

0.20

HallStar® GC4

Caprylic/Capric Triglyceride

5.00

BioChemica™ Grape Seed Oil -– Refined™4

Vitis Vinfera (Grape) Seed Oil

3.00

BioChemica™ Walnut Oil – Ultra Refined™4

Juglans Regia (Walnut) Oil

2.00

SolaStay® S14

Ethylhexyl Methoxycrylene

4.00

BioChemica™ Kokum Butter – Ultra Refined™4

Garcinia Indica Seed Butter

2.00

HallStar ® GMS Pure4

Glyceryl Stearate

0.17

HallStar® GMS SE/AS4

Glyceryl Stearate, PEG-100 Stearate

3.00

HallStar® TA-1618 Cetearyl Alcohol4

Cetearyl Alcohol

0.50

Emulsiphos®5

Potassium Cetyl Phosphate, Hydrogenated Palm Glycerides

1.00

BHT6

BHT

0.08

Vitamin A Palmitate 1.7 Mio IU./G (Tocopherol)7

Retinyl Palmitate

0.25

SF 12028

Cyclopentasiloxane

2.00

Velvesil™ 1258

Cyclopentasiloxane, C30-45 Alkyl Cetearyl Dimethicone Crosspolymer

2.50

MSS-500W9

Silica

2.00

Preparation:

To a suitable vessel equipped with mixing, heating and cooling capabilities, add A and start mixing. When dissolved, add B. When B is fully hydrated, start heating to 140°F (60°C). Premix C and add during the heating of this water phase. In a separate vessel, combine D and start mixing. Heat to 176°F (80°C), then add E in order. Mix until this oil phase is homogeneous, then cool to 149°F (65°C). Add F with mixing, then immediately add the oil phase to the water phase when both phases are homogeneous and at their designated temperatures. Continue mixing at a high shear for two minutes. Homogenize for 10 minutes, then resume mixing and start cooling. At 122°F (50°C) or lower, add premix of G and mix well. Add H and mix well. Cool to ambient temperature, then add water as needed to bring to full batch mass. When again uniform, stop mixing and perform final quality assurance checks.

Notes:

PROPERTIES (25°C) Appearance: Light yellow cream Viscosity (RV, T-D, 5, 20 & 100 rpm, cP): 36000, 12600 & 4040 pH: 5.8 SUPPLIERS 1Dow Chemical 2Noveon / Lubrizol 3Lyondell 4HallStar 5Symrise 6Merisol Antioxidants 7BASF 8Momentive 9Kobo Products

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Featured Supplier

We make beauty natural.
Lipoid Kosmetik is a leading manufacturer of natural raw materials for the cosmetic and personal care industry. High-quality botanical actives and extracts (Lipoid Kosmetik AG, Switzerland) as well as pharma grade natural lecithins and phospholipids (Lipoid GmbH, Germany) are part of our sophisticated portfolio.

Learn more »